Prices are per Roofing Square in US Dollars.
One Roofing Square = 100 sq.ft. = 9.3 m2.
This 24" shake product has 5 bundles per square,
based on a maximum recommended roof exposure of 10".
See Shipping Cost Estimates
RECOMMENDED USE - for walls and roofs with
4:12 pitch or steeper where a high quality and durable product with a uniform
appearance is desired. The standard recommended exposure for roof
applications is 10" (254mm).
GENERAL GRADE DESCRIPTION - No.1
Grade Blue
Label shakes are 100% Heartwood, 100% Clear and allow a maximum of 20% flat
grain.
THE SHINGLE DIMENSION ARE:
- nominal thickness - 5/8" (16 mm)
- 3/4", 7/8" and custom cut available
on request
- nominal length - 24" (610mm)
- random width from 4" to 14" (100 to 355mm)
ONE BUNDLE CONTAINS:
- approx. 50 shakes
- 18 rows (9/9 pack)
- min. 268 lineal inches, (6.80 lin.m.) measured edge to edge
- 20 sq.ft. (1.86 m2) with a 10" (250mm) roof exposure
(recommended)
- there are 5 bundles per one roofing square -
100 sq.ft. (9.3 m2)
SHIPPING INFORMATION:
- bundle weight green - 50 lbs (23 kg)
- bundle weight kiln dried - 35 lbs (16 kg)
- bundle size - 18" x 26" x 9" (45x66x23cm)
WxLxH
- pallet size - 42" x 53" x 84" (107x137x213cm)
WxLxH
- pallet weight green - 2,750 lbs (1250 kg) (55 bundles)
- pallet cubics - 110 cu.ft. (3.1 m3)
- number of bundles per pallet - 50 to 60
- 20ft container capacity - 450 bundles / 9 pallets
- 40ft container capacity - 900 bundles / 18 pallets
FOLLOW THE LINKS TO ADD ACCESSORIES AND TREATMENTS!
One Bundle of 24" Tapersawn Shakes Requires:
2 inch (51mm) Stainless Steel Nails -
0.50 lb/bdl. (0.23kg)
2 inch (51mm) Double Hot-Dipped Zinc Galvanized Nails -
0.50 lb/bd (0.23kg)
Pre-Made Hip & Ridge Cap Units
Save time, labor and money - top your roof like a professional with Pre-made
Hip & Ridge Cap Units. Follow the link below to add just the right amount of
ridge cap to match the products chosen above.
Add some Pre-made Hip & Ridge Cap Units
Cedar Breather
For those of you in the US Northeast, or others planning to lay shingles directly
on a solid roof deck, rather than spaced furring strips or lath, we highly recommend you
consider creating an air space between the shingles and the plywood deck.
Add some CEDAR BREATHER!
Roll Vent
The original and best ridge vent on the market for proper attic ventilation!
Add some ROLL VENT!
Kiln Drying
In some markets it is traditional to kiln dry, (KD) the shingles, reducing weight for shipping and handling.
It also pre-seasons the wood and reduces shrinkage after applications. Some countries, (ie. Australia and New Zealand)
require all imported wood products to be kiln dried for agricultural quarantine reasons.
Kiln Dry for Tapersawn Shakes
Pressure Impregnated CCA Preservative Treatment
CCA can almost double the life of your new roof for a fraction of the cost of the shingles.
Highly recommended in areas of high humidity and heat!
CCA Preservative Treatment for
Tapersawn Shakes
CCA Preservative Treatment + Kiln Dry for
Tapersawn Shakes
Pressure Impregnated Fire Retardant Treatments
Guard your roof against the spread of fire. Guaranteed effective for the life of the roof!
Check with your local building officials to confirm which Class treatment, if any, is required.
Please contact us if you require a Class A cedar roof system.
Class C Fire Retardant Treatment for
Tapersawn Shakes
Class B Fire Retardant Treatment for
Tapersawn Shakes
Please note that it is not possible to add both CCA and Fire Retardant
treatments.
REMEMBER TO ACCOUNT FOR WASTAGE -
USUALLY 10% EXTRA!
