Prices are per Roofing Square in US Dollars.
One Roofing Square = 100 sq.ft. = 9.3 m2.
This 24" shingle product has 4 bundles per square,
based on a maximum recommended roof exposure of 7-1/2".
See Shipping Cost Estimates
RECOMMENDED USE - for walls and roofs with 3:12 pitch or steeper where a
premium quality product is desired.
GENERAL GRADE DESCRIPTION - All No.2 Grade Red
Label shingles contain mixed grain, (edge grain and flat grain) and a limited amount of sapwood. No.2 Grade
24" (610mm) ROYAL shingles are free of knots and defects up to 16"
(406mm) above the butt.
THE SHINGLE DIMENSION ARE:
- nominal thickness - 0.50" (12.5mm)
- nominal length - 243" (610mm)
- random width from 4" to 14" (100 to 355mm)
ONE BUNDLE CONTAINS:
- approx. 80 shingles
- 29 rows (14/15 pack)
- min. 465 lineal inches, (11.81 m) measured edge to edge
- 18 sq.ft. (1.70m2) with a 5-1/2" (140mm) 4 ply
roof exposure
- 33 sq.ft. (3.10m2) with a 10" (254mm) wall exposure
- there are 4 bundles per one roofing square -
100 sq.ft. (9.3 m2)
SHIPPING INFORMATION (approximate):
- bundle weight green - 70 lbs (32 kg)
- bundle weight kiln dried - 45 lbs (20.4 kg)
- bundle size - 18" x 26" x 9" (45x66x23cm)
WxLxH
- pallet size - 42" x 53" x 84" (107x137x213cm)
WxLxH
- pallet weight green - 3,500 lbs (1590 kg) (50 bundles)
- pallet cubics - 110 cu.ft. (3.1 m3)
- number of bundles per pallet - max 60
- 20ft container capacity - 400 bundles / 8 pallets
- 40ft container capacity - 900 bundles / 18 pallets
FOLLOW THE LINKS TO ADD ACCESSORIES AND TREATMENTS!
One Bundle of 24" Shingles Requires:
1-1/2 inch (38mm) Stainless Steel Nails -
0.45 lb/bdl. (0.20kg)
1-1/2 inch (38mm) Double Hot-Dipped Zinc Galvanized Nails - 0.45 lb/bdl (0.20kg)
Pre-Made Hip & Ridge Cap Units
Save time, labor and money - top your roof like a professional with Pre-made
Hip & Ridge Cap Units. Follow the link below to add just the right amount of
ridge cap to match the products chosen above.
Add Pre-made Hip & Ridge Cap Units
Cedar Breather
For those of you in the US Northeast, or others planning to lay shingles directly
on a solid roof deck, rather than spaced furring strips or lath, we highly recommend you
consider creating an air space between the shingles and the plywood deck.
Add CEDAR BREATHER!
Roll Vent
The original and best ridge vent on the market for proper attic ventilation!
Add ROLL VENT!
Kiln Drying
In some markets it is traditional to kiln dry, (KD) the shingles, reducing weight for shipping and handling.
It also pre-seasons the wood and reduces shrinkage after applications. Some countries, (ie. Australia and New Zealand)
require all imported wood products to be kiln dried for agricultural quarantine reasons.
Kiln Dry for Shingles
Pressure Impregnated CCA Preservative Treatment
CCA can almost double the life of your new roof for a fraction of the cost of the shingles.
Highly recommended in areas of high humidity and heat!
Add CCA Treatment for Shingles
Add CCA Treatment + Kiln Dry for Shingles
Pressure Impregnated Fire Retardant Treatments
Guard your roof against the spread of fire. Guaranteed effective for the life of the roof!
Check with your local building officials to confirm which Class treatment, if any, is required.
Please contact us if you require a Class A cedar roof system.
Add Class C Fire Retardant Treatment for Shingles
Add Class B Fire Retardant Treatment for Shingles
Please note that it is not possible to add both CCA and Fire Retardant
treatments.
REMEMBER TO ACCOUNT FOR WASTAGE -
USUALLY 10% EXTRA!
